Azeem Pasha | Metal Matrix Composites | Editorial Board Member

Published on 15/11/202515/11/2025 by Composite Awards

Azeem Pasha | Metal Matrix Composites | Editorial Board Member

Prof. Azeem Pasha at KNS Institute of Technology | India

Azeem Pasha is a dedicated mechanical engineering researcher specializing in functionally graded materials (FGMs) for aerospace and automotive applications, with a strong focus on composite design, powder metallurgy, nano-reinforcement, and advanced material characterization. Currently pursuing his Ph.D. at Bangalore University, his research investigates microstructural tailoring and performance enhancement of AlSi-based FGMs reinforced with carbon nanotubes (CNTs) and multi-walled carbon nanotubes (MWCNTs), aiming to achieve superior mechanical, tribological, and structural reliability in high-stress environments. His academic career includes extensive teaching and research experience as an Assistant Professor at KNSIT Institute of Technology since 2022, following seven years of service at Brindavan College of Engineering. His publications demonstrate a consistent focus on functional gradation, powder metallurgy, hot extrusion, and hybrid composite development, with notable works addressing tribological behavior of CNT-reinforced AlSi FGMs, microstructure and mechanical properties of AlSi/MWCNT composite cylinders, CNT content optimization, and load-dependent wear and friction mechanisms. Expanding beyond metal-based FGMs, he has also contributed to polymer composite engineering, including studies on low-velocity impact strength of E-glass and carbon-fiber hybrid laminates. His research integrates experimental characterization, microstructural analysis, mechanical testing, and property–performance correlations, contributing to the development of lightweight, high-strength, and wear-resistant materials for futuristic transportation systems. As an editorial board member and reviewer for multiple Scopus-indexed journals, he actively contributes to the scientific community, ensuring rigorous evaluation and dissemination of emerging research in materials engineering. His ongoing doctoral work continues to advance the understanding of gradient material behavior, nano-reinforcement distribution, and process–property interactions, positioning him as an emerging researcher committed to developing next-generation materials capable of meeting demanding aerospace, automotive, and high-performance engineering applications.

Profile: Scopus | Orcid

Featured Publications

Pasha, A., & Rajaprakash, B. M. (2023). Tribological behavior of powder metallurgy processed carbon nanotube reinforced AlSi functionally graded materials. Material Science Research India, 20(2).

Pasha, A., & Rajaprakash, B. M. (2023). Microstructure and mechanical properties of functionally graded AlSi/MWCNT composite cylinders. Material Science Research India, 20(1).

Prasad, M., Ahmed, N., Pasha, A., & Manjunath, A. C. (2022). Experimental investigation on low-velocity impact strength of E-glass/carbon fiber reinforced hybrid polymer composite. International Journal of Vehicle Structures and Systems, 14(2).

Pasha, A., & Rajaprakash, B. M. (2022). Effect of CNT content on microstructure and hardness of AlSi/MWCNT nanocomposite. Materials Today: Proceedings, 58.

Pasha, A., & Rajaprakash, B. M. (2022). Effect of load on wear and friction of AlSi/MWCNT functionally graded material via powder metallurgy with hot extrusion technique. Material Science Research India, 19(3).

Ghodratollah Roudini | Metal Matrix Composites | Editorial Board Member

Published on 15/11/202515/11/2025 by Composite Awards

Ghodratollah Roudini | Metal Matrix Composites | Editorial Board Member

Dr. Ghodratollah Roudini at University of Sistan & Baluchestan | Iran

Dr. Ghodratollah Roudini is an accomplished Iranian materials engineer and Associate Professor at the University of Sistan and Baluchestan, where he has served since 2007 and played influential leadership roles, including Vice President for Planning and Development and Head of the Materials Engineering Department. Born on 23 September 1962 in Zabol, Iran, he holds a Ph.D. in Materials Engineering from the Laboratory for Mechanical Metallurgy (LMM) at EPFL, Switzerland, along with Master’s and Bachelor’s degrees in Materials Engineering from Tehran University and Shiraz University. His research expertise spans metal matrix composites, nanocomposites, phase-change materials, thermal energy storage systems, metal forming, and advanced materials design. Dr. Roudini has led and supervised extensive graduate and undergraduate research, contributing significantly to the development of innovative materials with tailored mechanical, thermal, and structural properties. His scholarly contributions include impactful publications on composite behavior, wear mechanisms, interpenetrating-phase structures, hydrophobic nanocomposites for oil–water separation, dislocation modeling, thermal energy storage nanomaterials, and advanced coating technologies. His recent works explore the mechanical and tribological performance of hybrid aluminum–ceramic composites, the design of polyurethane–magnetite–titanium dioxide nanocomposites, and the engineering of SiO2- and graphene-based thermal storage materials, reflecting his broad scientific vision and interdisciplinary approach. With deep experience in teaching advanced materials, metal forming, powder metallurgy, composites, nanocomposites, and dislocation theory, he has shaped the academic growth of many students. His career also includes earlier roles as lecturer and teaching assistant, marking more than three decades of continuous academic engagement. Highly respected for his scientific rigor and commitment to practical materials innovation, Dr. Roudini continues to contribute to engineering research that advances industrial, energy, and environmental applications.

Profile: Scopus

Featured Publications

Zeinali-Moghaddam, H., Roudini, G., & Khosravi, H. (2024). Influence of nanodiamond on compressive and dry-sliding wear behaviors of Al₂O₃–Al interpenetrating-phase composites. Diamond and Related Materials, 149, 111627.

Aghapour, J., Roudini, G., & Khosravi, M. (2024). Mechanical behavior of Al/Al₂O₃p–SiCp hybrid composite fabricated by hot pressing method. Materials Letters, 11(15), 137215.

Hashemi Shahri, S., & Roudini, G. (2023). Mechanical behavior of magnesium–steel particles composites with interpenetrating phases. Journal of Particle Science and Technology, 9(1), 29–34.

Khandan Barani, A., Roudini, G., Barahuie, F., & Masuri, S. U. B. (2023). Design of hydrophobic polyurethane–magnetite iron oxide–titanium dioxide nanocomposites for oil–water separation. Heliyon, 9(5), e15580.

Musavi, S. M., Roudini, G., Barahuie, F., & Masuri, S. U. B. (2021). Thermal energy storage property and temperature control performance of phase change materials eutectic mixture nanocomposite. Micro and Nanosystems, 14(3), 272–280.

Farzad Pashmforoush | composite materials | Best Researcher Award

Published on 13/02/202513/02/2025 by Composite Awards

Farzad Pashmforoush | composite materials | Best Researcher Award

Assoc. Prof. Dr. Farzad Pashmforoush , Best Researcher Award , Iran.

Dr. Farzad Pashmforoush is an Associate Professor at the University of Maragheh, specializing in Mechanical Engineering. With a Ph.D. from Amirkabir University of Technology (2015), his expertise spans composite materials, finite element analysis, artificial intelligence, and non-destructive testing. His research contributions, recognized with 411 citations and an h-index of 9 , focus on damage identification, numerical modeling, and advanced manufacturing techniques. Dr. Pashmforoush has authored numerous high-impact publications and continues to push the boundaries of mechanical engineering and material sciences with innovative methodologies.

Publication Profile

Google Scholar

Orcid

Scopus

Education & Experience

Bachelor’s (2005-2009): Mechanical Engineering, University of Tabriz (Ranked 1st, 18.86 GPA)
Master’s (2009-2011): Mechanical Engineering, Amirkabir University of Technology (Ranked 1st, 18.52 GPA)
Ph.D. (2011-2015): Mechanical Engineering, Amirkabir University of Technology (19.26 GPA)
Current Position: Associate Professor, University of Maragheh

Suitabilty Summary

Dr. Farzad Pashmforoush, an Associate Professor at the University of Maragheh, has made outstanding contributions to the field of mechanical engineering, composite materials, and non-destructive testing (NDT). His pioneering research in damage characterization, artificial intelligence applications in material analysis, and advanced manufacturing techniques has significantly impacted the scientific community, making him a strong candidate for the Best Researcher Award.

Professional Development

Dr. Pashmforoush is actively engaged in cutting-edge research and academic mentoring . He has pioneered advancements in composite material behavior, AI-driven structural analysis, and non-destructive evaluation . His research integrates numerical simulations, experimental techniques, and machine learning algorithms to enhance manufacturing and material testing. With extensive experience in FEM modeling and fracture mechanics, he collaborates with global researchers to develop robust, high-performance materials . His contributions significantly impact aerospace, automotive, and civil engineering applications, making him a distinguished figure in mechanical and materials engineering.

Research Focus

Dr. Pashmforoush’s research spans multiple domains of mechanical and material sciences . His work on composite materials explores damage identification and characterization using advanced acoustic emission techniques . He employs finite element modeling (FEM) for fracture mechanics simulations and integrates artificial intelligence and deep learning for autonomous damage recognition in composite structures. His studies also delve into non-destructive testing (NDT), optical glass finishing, and nanocomposite material analysis . His research aims to enhance the durability, performance, and sustainability of advanced engineering materials , bridging the gap between experimental mechanics and AI-driven simulations.

Awards & Honors

1st Rank in B.Sc. & M.Sc. Mechanical Engineering
Outstanding Researcher Award in Composite Materials & FEM
Best Ph.D. Dissertation Award on Magnetic Abrasive Finishing
Numerous High-Impact Publications with 400+ Citations
Recognized Reviewer for Leading Scientific Journals

Publications Top Notes

Autonomous damage recognition in visual inspection of laminated composite structures using deep learning – S Fotouhi, F Pashmforoush, M Bodaghi, M Fotouhi | Composite Structures (2021) | Cited by: 87

Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy C-means clustering – M Fotouhi, H Heidary, M Ahmadi, F Pashmforoush | Journal of Composite Materials (2012) | Cited by: 86

Damage classification of sandwich composites using acoustic emission technique and k-means genetic algorithm – F Pashmforoush, R Khamedi, M Fotouhi, M Hajikhani, M Ahmadi | Journal of Nondestructive Evaluation (2014) | Cited by: 83

Acoustic emission-based damage classification of glass/polyester composites using harmony search k-means algorithm – F Pashmforoush, M Fotouhi, M Ahmadi | Journal of Reinforced Plastics and Composites (2012) | Cited by: 72

Damage characterization of glass/epoxy composite under three-point bending test using acoustic emission technique – F Pashmforoush, M Fotouhi, M Ahmadi | Journal of Materials Engineering and Performance (2012) | Cited by: 66