Ghodratollah Roudini | Metal Matrix Composites | Editorial Board Member

Ghodratollah Roudini | Metal Matrix Composites | Editorial Board Member

Dr. Ghodratollah Roudini at University of Sistan & Baluchestan | Iran

Dr. Ghodratollah Roudini is an accomplished Iranian materials engineer and Associate Professor at the University of Sistan and Baluchestan, where he has served since 2007 and played influential leadership roles, including Vice President for Planning and Development and Head of the Materials Engineering Department. Born on 23 September 1962 in Zabol, Iran, he holds a Ph.D. in Materials Engineering from the Laboratory for Mechanical Metallurgy (LMM) at EPFL, Switzerland, along with Master’s and Bachelor’s degrees in Materials Engineering from Tehran University and Shiraz University. His research expertise spans metal matrix composites, nanocomposites, phase-change materials, thermal energy storage systems, metal forming, and advanced materials design. Dr. Roudini has led and supervised extensive graduate and undergraduate research, contributing significantly to the development of innovative materials with tailored mechanical, thermal, and structural properties. His scholarly contributions include impactful publications on composite behavior, wear mechanisms, interpenetrating-phase structures, hydrophobic nanocomposites for oil–water separation, dislocation modeling, thermal energy storage nanomaterials, and advanced coating technologies. His recent works explore the mechanical and tribological performance of hybrid aluminum–ceramic composites, the design of polyurethane–magnetite–titanium dioxide nanocomposites, and the engineering of SiO2- and graphene-based thermal storage materials, reflecting his broad scientific vision and interdisciplinary approach. With deep experience in teaching advanced materials, metal forming, powder metallurgy, composites, nanocomposites, and dislocation theory, he has shaped the academic growth of many students. His career also includes earlier roles as lecturer and teaching assistant, marking more than three decades of continuous academic engagement. Highly respected for his scientific rigor and commitment to practical materials innovation, Dr. Roudini continues to contribute to engineering research that advances industrial, energy, and environmental applications.

Profile:  Scopus
Featured Publications 

Esra Uyar | High entropy alloy | Best Researcher Award

Esra Uyar | High entropy alloy | Best Researcher Award

Assist. Prof. Dr.Esra Uyar , Gazi University , Turkey.

Asst. Prof. Dr. Esra Uyar 🎓🔬 is a dedicated physicist specializing in nuclear sciences and health physics. She earned her Ph.D. in Physics from Gazi University (2022) and holds postgraduate and undergraduate degrees from Ankara University. With expertise in nuclear material accounting, radiation safety, and metrology, she has actively participated in international training programs. Her research focuses on nuclear physics, radiation protection, and heavy ion transport. Passionate about advancing scientific knowledge, she has contributed to various academic and research initiatives. She is affiliated with multiple international research databases, including Scopus, ORCID, and Web of Science. 🌍📚

Publication Profile

Scopus
Google Scholar

Education & Experience

📌 Doctorate – Physics, Gazi University (2018-2022)
📌 Postgraduate – Health Physics, Ankara University (2007-2010)
📌 Undergraduate – Physics, Ankara University (2003-2007)
📌 Researcher – Specialized in nuclear sciences, metrology, and radiation safety
📌 Trainer & Speaker – Conducted training on nuclear safeguards and metrology
📌 Affiliations – Linked with international research platforms like ORCID, Scopus & Web of Science

Suitability Summary

Asst. Prof. Esra Uyar is a distinguished researcher in nuclear physics and radiation detection, making significant contributions to gamma-ray spectrometry, detector efficiency enhancement, and nuclear safeguards. Her expertise spans radiation protection, Monte Carlo simulations, and metrology, with a strong academic foundation and impactful research publications. Given her extensive work in high-precision radiation measurement techniques and nuclear material analysis, she is a strong candidate for the Best Researcher Award.

Professional Development

Asst. Prof.Dr. Esra Uyar 🔬📊 has actively engaged in professional training and workshops to enhance her expertise in nuclear sciences. She has completed vocational training in laboratory calibration, nuclear safeguards, and heavy ion transport systems from institutions such as the Japan Atomic Energy Agency and TÜBİTAK. She has also attended metrology and statistical evaluation workshops, ensuring proficiency in integrated management systems. Through continuous learning, she has developed a strong foundation in nuclear material security, auditing, and measurement uncertainty, significantly contributing to the scientific community. Her professional growth reflects her commitment to advancing nuclear physics and radiation protection. 🌍⚛️

Research Focus

Asst. Prof.Dr. Esra Uyar research revolves around nuclear physics, health physics, and metrology. 🏥⚛️ She explores radiation protection, nuclear material security, and particle transport simulations. Her studies also focus on the impact of ionizing radiation in medical and industrial applications, ensuring safety and efficiency. She has worked extensively on nuclear safeguards and statistical evaluations in metrology, contributing to advancements in quality control and precision measurement. Through international collaborations, she aims to enhance nuclear security standards and refine measurement techniques, bridging the gap between fundamental research and practical applications. Her work is crucial for energy, healthcare, and environmental safety. 🌱🔬

Awards & Honors

🏆 Research Recognition – Featured in Web of Science, Scopus, and ORCID databases
🏆 International Training Participation – Selected for nuclear security training in Japan & Turkey
🏆 Academic Excellence – Ph.D. in Physics from Gazi University with distinction
🏆 Metrology Expertise – Awarded certifications in precision measurement and laboratory calibration
🏆 Nuclear Safety Advocate – Recognized for contributions to nuclear safeguards and security

Publication Top Notes

📖 Spectral interference corrections for the measurement of ²³⁸U in materials rich in thorium by a high-resolution gamma-ray spectrometryD. Yücel, H. Solmaz, A.N. Köse, E. BorApplied Radiation and Isotopes (2009) – Cited by: 41 🔬📡

📖 Investigation of shape effects and dead layer thicknesses of a coaxial HPGe crystal on detector efficiency by using PHITS Monte Carlo simulationM.H. Bölükdemir, E. Uyar, G. Aksoy, H. Ünlü, H. Dikmen, M. ÖzgürRadiation Physics and Chemistry (2021) – Cited by: 29 💻📊

📖 Methods for spectral interference corrections for direct measurements of ²³⁴U and ²³⁰Th in materials by gamma-ray spectrometryH. Yücel, A.N. Solmaz, E. Köse, D. BorRadiation Protection Dosimetry (2010) – Cited by: 27 ⚛️📡

📖 A semi-empirical method for calculation of true coincidence corrections for the case of a close-in detection in γ-ray spectrometryH. Yücel, A. Solmaz, E. Köse, D. BorJournal of Radioanalytical and Nuclear Chemistry (2010) – Cited by: 22 📈⚛️

📖 Correction methodology for the spectral interfering γ-rays overlapping to the analytical peaks used in the analysis of ²³²ThH. Yücel, E. Köse, A.N. Esen, D. BorApplied Radiation and Isotopes (2011) – Cited by: 16 🧪📡

📖 A novel approach in voltage transient technique for the measurement of electron mobility and mobility-lifetime product in CdZnTe detectorsH. Yücel, Ö. Birgül, E. Uyar, Ş. ÇubukçuNuclear Engineering and Technology (2019) – Cited by: 11 ⚙️📊

📖 Investigation of the effect of copper contact pin on efficiency in HPGe detectors using Monte Carlo methodE. Uyar, G. Aksoy, H. Ünlü, M.H. BölükdemirJournal of Instrumentation (2021) – Cited by: 9 📡💻

Yingju Li | superalloys | Best Researcher Award

Yingju Li | superalloys | Best Researcher Award

Prof. Yingju Li , Institute of Metal Research, Chinese Academy of Sciences , China.

Yingju Li is a Researcher Fellow at the Institute of Metal Research, Chinese Academy of Sciences. He has made groundbreaking contributions to developing high-temperature alloys with exceptional glass corrosion resistance, improving corrosion resistance by 70%. Yingju has published over 70 papers and holds more than 50 patents. He has been recognized with prestigious awards for scientific and technological progress in China’s nonferrous metal industry and Shandong province. His work in material design, corrosion resistance, and superalloys continues to have a significant impact in the field. 🏅📚🔬

Publication Profile

Scopus

Education and Experience

  • Ph.D., Institute of Metal Research, Chinese Academy of Sciences 🎓
  • Researcher Fellow, Institute of Metal Research, Chinese Academy of Sciences 🔬
  • Contributor to National Key Research and Development Programs 🏆

Suitability Summary

Prof.Yingju Li, Ph.D., a Researcher Fellow at the Institute of Metal Research, Chinese Academy of Sciences, is a deserving candidate for the Best Researcher Award due to his outstanding contributions to material science, particularly in the development of high-temperature alloys and corrosion-resistant materials. His innovative research has not only advanced scientific knowledge but has also had significant industrial impact, particularly in fields such as aerospace and manufacturing.

Professional Development

Yingju Li has continuously advanced his professional development through collaboration with leading academic and research institutions like Xiamen University. He has been integral in designing and preparing advanced Co-based superalloys, significantly enhancing corrosion resistance and mechanical properties. His groundbreaking work in electromagnetic field-controlled solidification and material design has contributed to the development of novel alloys. Additionally, his continuous involvement in national and international research projects has enabled him to mentor and guide the future generation of researchers. He is an active member of the Electromagnetic Metallurgy Branch of the China Metal Society, further boosting his professional network. 🌟🤝📈

Research Focus 

Yingju Li’s research primarily focuses on the development of corrosion-resistant superalloys, material design, and solidification technologies. His work addresses key challenges in the preparation and improvement of alloys, such as overcoming issues with high density and poor thermal stability. He has innovated techniques like multi-element microalloying to strengthen magnesium alloys and has developed high-strength magnesium alloys that are recognized internationally. His research also emphasizes electromagnetic field-controlled solidification to improve material quality and casting precision, particularly in large complex thin-walled components. His contributions continue to shape advancements in materials science, benefiting both academia and industry. ⚙️🔧🧪

Awards and Honors

  • First Prize for Scientific and Technological Progress in China Nonferrous Metal Industry 🏅
  • Second Prize for Scientific and Technological Progress in China Nonferrous Metal Industry 🥈
  • Second Prize for Scientific and Technological Progress in Shandong Province 🥈
  • 56 Patents Published 📜
  • Over 70 Papers Published in International Journals 📚

Publication Top Notes

Effect of trace Al and Ti elements on borosilicate glass corrosion resistance of Inconel 690 alloy. Journal of Nuclear Materials, 606, 155626. 📄

Microstructure evolution and dynamic recrystallization mechanisms of Mg-Al-Ca-Zn-Sn-Mn alloys with different Ca contents during hot extrusion. Journal of Alloys and Compounds, 1011, 178400. 🔧

Erratum to “Thermal corrosion behavior of Inconel 693, Hastelloy N, and 310S in ceramic waste forming reactions”. Journal of Nuclear Materials, 604, 155468. 🔄

Thermal corrosion behavior of Inconel 693, Hastelloy N, and 310S in ceramic waste forming reactions. Journal of Nuclear Materials, 603, 155416. ⚙️

Finite Element Analysis of Dry Friction Wear of Al-based Composite Coatings. Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 38(12), pp. 941–949. 🔍

Three-dimensional modeling of electromagnetic field and fluid flow during solidification of an aluminum alloy in a pulsed magnetic field. Materialwissenschaft und Werkstofftechnik, 55(12), pp. 1732–1742. 🧲